Part Names; Part Names And Functions Of The Remote Controller - Toshiba RAV-HM301U1TP-E Owner's Manual

1

Part names

■
Indoor unit
Center hook
Push the center hook for
open the air inlet grille.
Horizontal louver / Air discharge
The air discharge direction can be changed.
Hook lock grille
Slide the hook lock grille for
open/close the air inlet grille.
Earth screw
Inside the electrical box.
■
Outdoor unit (The design varies depending on the outdoor unit.
The following illustration shows an example.)
Air intake (Side and rear)
Fixing leg
Hook lock grille
Slide the hook lock grille for
open/close the air inlet grille.
Air inlet grille
Air is taken in through here.
Air fi lter
Filters out dust.
(Behind the air inlet grille)
Panel
There is an earth screw, valves, and
electric parts inside.
Air discharge
Piping panel
Wiring hole
Refrigerant pipe outlet
– 2 –
2
Part names and functions of the remote
controller
Remote controller model name: RBC-ASCU1
LCD back-light lights for 15 seconds during remote controller operation.
All indicators are displayed in the display example below.
Actually, only the selected options will be displayed.
■
Operations
4 3 2
1
ON/OFF button
Turns on the unit when pushed, and turns off when pushed again.
2
Setting button
Sets setting temperature at the normal mode.
Changes each setting at the Operation mode, the Fan speed mode or the Wind direction mode.
3
OFF timer button
Setting the OFF timer.
4
Menu button
Selects the Operation mode select, the Fan speed select or the Wind direction select.
Each time you push the button, indicator is displayed as followings.
• The Fan speed select or the Wind direction select is not displayed depending on indoor unit models.
Normal operation Operation mode
mode select
Operation lamp
Lights during operations.
Blinks when a check occurs or the
protective device activates.
1
Wind direction
Fan speed select
select
EN