Chamberlain RSW12UL Installation Manual page 51

Residential dc vehicular swing gate operator
Hide thumbs Also See for RSW12UL:
Table of Contents

Advertisement

Miscellaneous
Remote antenna extension kit
The remote antenna extension kit allows the antenna
to be remotely installed.
Model 86LM
Commercial access control receiver
Access control receiver for up to 1,000 devices (any
combination of remote controls and wireless keyless
entries).
Model STAR1000
Plug-in loop detector
Low power. Conveniently plugs into existing control
board. Not to be used as entrapment protection.
Model LOOPDETLM
Loop detector
Low power loop detectors mounted and wired
separately inside control box. LiftMaster low power
accessory. Not to be used as entrapment protection.
Model LD7LP
Vehicle sensing probe
The vehicle sensing probe is buried in the ground and
can detect a car as it approaches and will then open
the gate.
Model CP4
Solar panel kit
This kit is to replace or add a solar panel to the
operator application. 60W maximum for 24 Vdc
operators and 30W maximum for 12 Vdc operators.
Requires a 33AH battery harness.
Models SP10W12V (10 Watt, 12V) and SP20W12V
(20 Watt, 12V)
Magnetic gate lock
Outdoor magnetic lock, transformer, junction box,
mounting plate and hardware. Not for use with Solar
Applications. Must be powered separately.
Model MG1300
Heater
The heater keeps the gearbox and batteries at a
suitable temperature when the outside temperature is
below -4°F (-20°C). The thermostat MUST be set
between 45°F and 60°F (7°C and 15.5°C) to ensure
proper gate operation. The heater can be powered by
110 to 250 Vac.
Model HTR
Wire harness
Between main control board and expansion board.
Model K94- 34778
ACCESSORIES
40-39235-1
Batteries
Gate access system batteries replace or upgrade the gate operator batteries. Two
identical 12 Vdc batteries are required for each gate operator. Do not mix 7AH and
33AH batteries within a gate operator.
51
®
LiftMaster
Internet Gateway
Internet enabled accessory which connects your gate
operator to your WiFi network and allows you to monitor
and control gate operators and lighting accessories
®
enabled by myQ
technology.
Model 828LM
Expansion board
Additional programming features including external
loops, plug-in loops, auxiliary relays, and inputs for
additional controls and entrapment protection devices.
Model K1D8387-1CC
Wireless commercial keypad
Durable wireless keypad with blue LED backlight metal
keypad, zinc-alloy metal front cover and 5 year 9V lithium
®
battery. Security+ 2.0
compatible.
Model KPW250
Warning sign
Model 40-39235
7AH batteries
Standard 7 AMP-Hour Battery, 12 Vdc, to replace original
batteries provided with operator. Reuse existing
harnesses.
Models 29-NP712 (1) and K74-30762 (2)
33AH batteries
Upgrade 33 AMP-Hour Battery, 12 Vdc. Ideal for solar
applications and extended battery backup. Two required.
Model A12330SGLPK
Battery tray
For use with 33AH batteries.
Model K10-36183
Universal solar wire harness kit
For 7AH and 33AH applications.
Model K94-37236

Advertisement

Table of Contents
loading

Table of Contents