Appendix; Dual Gate Settings; Types Of Installations - Chamberlain RSW12UL Installation Manual

Dual Gate Settings

NOTE: We recommend that all accessories and board configurations are set on the primary operator.
Main control board
FEATURE PRIMARY OPERATOR
Timer-to- Set the TTC dial to desired
Close setting
Bi-Part Bi-Part Delay: ON (will open
Delay last and close first)
Switch
Tandem Mode: OFF
Synchronized Close: ON

Types of Installations

Standard Installation
The illustration is an example of a standard installation.
Compact Installation
The illustration is an example of a compact installation. If the operator arm will hit an obstruction when the gate is in the open position, refer to
LiftMaster.com for compact installation instructions. Entrapment protection devices must be employed in this area.

APPENDIX

SECONDARY OPERATOR
OFF
Bi-Part Delay: OFF (will
open first and close last)
Tandem Mode: OFF
Synchronized Close: ON
Inside Property
Inside Property
Accessories
ACCESSORY PRIMARY OPERATOR
Remote Controls Program remote
controls 1 to 50 to the
primary operator.
LiftMaster Internet Program to primary
Gateway operator.
Garage and Gate Program to primary
Monitor operator.
40
SECONDARY
OPERATOR
Program remote
controls 51 to 100 to
the secondary operator