Faxing Problems; Print Quality Problems - Epson WorkForce WF-7510 Manual Rapide

Faxing Problems

■
Make sure the recipient's fax machine is turned on and working.
■
Make sure the
that the telephone wall jack works by connecting a phone to it.
■
Make sure the
■
If your phone line includes voice mail answering services, calls or faxes may be
inadvertently received by your voice mail service.
■
If the line has static, press
the and
V.34 ECM
■
If the product is connected to a DSL phone line, you must have a DSL filter
connected to the phone jack. Contact your DSL provider for the filter.
■
If you connected a telephone or answering machine, make sure it is connected to the
port. Do not use a phone line splitter.
EXT.

Print Quality Problems

■
Make sure your paper is loaded printable side down (usually the whiter, brighter, or
glossy side).
■
For the best print quality, use Epson papers (see page 4) and genuine Epson ink
cartridges (see page 25).
■
Make sure the type of paper you loaded matches the paper type setting on the control
panel or in your printer software (see page 16).
■
If you notice light or dark bands across your printouts or they are too faint, run a
nozzle check (see page 22) to see if the print head needs cleaning.
■
If you notice jagged vertical lines, you may need to align the print head. See the online
User's Guide for instructions.
■
The ink cartridges may be low on ink. Check your cartridge levels (see page 24) and
replace cartridges, if necessary (see page 25).
■
Clean the scanner glass with a soft, dry, lint-free cloth (paper towels are not
recommended), or use a small amount of glass cleaner on a soft cloth, if necessary. Do
not spray glass cleaner directly on the glass.
port on the product is connected to a telephone wall jack. Verify
LINE
light is turned on to receive faxes automatically.
Auto Answer
, press x
Fax
settings.
, select
Menu Communication
Problems and Solutions
, and turn off
33