Epson Stylus Photo RX500 User Manual page 95

Note:
It won't be possible to insert the card fully; this is normal.
The memory card light flashes, then turns green.
Memory card light
Caution:
Do not insert more than one card into a shared memory card slot.
After the RX500 reads the card, you
see this message on the LCD screen if
it finds any images:
3. Load the type of paper you want to
print on. Insert it against the right
edge guide beneath the tab, and slide
the left edge guide lightly against it.
Note:
Remember to load the paper short edge first and printable (whiter or brighter)
side up.
4. Press the
Memory Card
5. Using the number keypad, enter the number of copies of each photo you want
to print (up to 99), and press
Note:
The number of copies is how many times each photo prints, not the number of
pages. For example, if you're using a layout that fits 8 photos and you select 3
copies, you will get one sheet with 3 photos printed on it.
Always load paper
short edge first
button to enter memory card mode.
.
OK
Found Images. . .
Total XXX
Printing From a Memory Card
OK
95