Epson Stylus Photo RX500 User Manual page 112

When you need new ink cartridges, contact your dealer. You can also call the
Epson Store SM
In Canada, please call (800) 463-7766 for dealer referral.
Caution:
To ensure good results, use genuine Epson ink cartridges and do not refill them. Other
products may cause damage to your RX500 not covered by Epson's warranty.
You can't print if an ink cartridge is empty. Leave the empty cartridge installed in the
RX500 until you have a replacement. Otherwise the ink remaining in the print head
nozzles may dry out.
Warning:
Keep ink cartridges out of the reach of children. If ink gets on your hands, wash them
thoroughly with soap and water. If ink gets in your eyes, flush them thoroughly with
water.
Follow these steps to replace an ink cartridge:
1. If an ink cartridge is empty:
Look at the LCD screen to see which cartridge is empty, then press the
Color
x
If an ink cartridge is low:
Press the
next to the LCD screen until
Color
x
2. When you see
open the scanner unit, as shown, making sure to keep the scanner lid closed
on top.
112
Maintaining the RX500
at (800) 873-7766 or visit www.epsonstore.com (U.S. sales only).
button.
button to enter setup mode, then press the upper left button
Setup
button.
Open the scanner
is displayed. Then press the
Replace Ink
on the LCD screen, use the side grips to