Solving Problems; Problems And Solutions; Copying Problems - Epson Stylus Photo RX500 User Manual

Solving Problems

If you have a problem with the RX500, check the messages on the LCD screen,
run a nozzle check (see page 109), or see "Problems and Solutions" below. For
problems with scanning or printing from your computer, or with uninstalling the
software, double-click the SP RX500 Reference Guide icon on your computer
desktop.
If none of the solutions solve your problem, see "Where To Get Help" on
page 123.

Problems and Solutions

Check the solutions below if you're having trouble using the RX500 in
stand-alone mode.

Copying Problems

Make sure your paper is positioned on the right side of the sheet feeder behind
the tab, with the left edge guide resting lightly against its left side. Don't load
paper above the arrow on the left edge guide.
Make sure your paper is loaded short edge first.
Make sure your original is
positioned in the top left
corner of the glass, with the
top edge of the original facing
left. Place it at least 0.1 inch
from the edge of the glass to
avoid cropping the image.
Make sure you pressed the
button to enter copy
Copy
mode.
Move the photo or
document in about
0.1 inch from the edges
121