Epson Stylus Photo RX500 User Manual page 76

4. Position the film holder so that the film strip faces the center of the scanner
glass. The positioning posts on the film holder fit in two small holes near the
scanner lid, as shown. Then go to step 6.
5. If you're scanning slides, position the film holder so that the slide section faces
the center of the scanner glass. The positioning posts fit in two small holes
near the scanner lid, as shown.
76
Scanning to a Computer
If you're scanning film,
position the film strip
toward the center
of the glass
If you're scanning
slides, position the
slide holders toward
the center of the glass