Epson Stylus Photo RX500 User Manual page 119

8. Remove the orange print head holder from its storage area and install it as
shown to prevent the print head from moving during transport. If you can't
find the orange print head holder, tape the print head to the case.
Caution:
Be sure to remove the print head holder or the tape after installing the RX500 in its
new location.
9. Lower the scanner unit carefully until it clicks back into place.
10. Repack the RX500 and its attachments in the original box using the protective
materials that came with them.
Caution:
Keep the RX500 level as you transport it.
After transporting the RX500, remove the print head holder or tape securing the
print head, unlock the transportation lock, and make a test copy. If you notice a
decline in quality, clean the print head (see page 109); if output is misaligned,
align the print head (see page 115).
Transporting the RX500
119