Troubleshooting - Epson EPL-N2550 Series User Manual

The compact contender
Hide thumbs Also See for EPL-N2550 Series:
Table of Contents

Advertisement

The Data Format setting is different
from the data format setting
specified in the application (except
on Mac OS X)
The network connection is
something other than AppleTalk,
and the Data Format setting is not
set to ASCII data.
For Windows 2000 users only
Job Management On is selected in
the printer's Properties.
For Windows users only
The computer is connected to the
network using AppleTalk in a
Windows 2000 environment, and
the Send CTRL+D Before Each Job
or Send CTRL+D After Each Job
setting on the Device Settings sheet
of the printer's Properties dialog box
is set to Yes.
For Windows users only
The print data is too large.
For Windows users only
Printing cannot be performed using
the network interface.
270

Troubleshooting

If the file is created in an application that
allows you to change the data format or
encoding, such as Photoshop, make sure
that the setting in the application
matches that in the printer driver.
If the network connection is something
other than AppleTalk, make sure that the
Data Format setting is set to ASCII data or
Tagged binary communications protocol
(Windows) or set to ASCII (Macintosh).
When AppleTalk is active and Job
Management ON is selected, the printer
does not print normally. Make sure to
clear the Job Management On check
box on the Job Settings sheet of the
printer's Properties.
Make sure that both the Send CTRL+D
Before Each Job and Send CTRL+D After
Each Job settings are set to No.
Click Advanced on the PostScript sheet of
the printer's Properties, then change the
Data Format setting from ASCII data
(default) to Tagged binary
communications protocol.
When the Binary setting is set to On, TBCP
is not available. Use the Binary protocol.
See "PS3 Menu" on page 171 for details.
Click Advanced on the PostScript sheet of
the printer's Properties, then change the
Data Format setting from ASCII data
(default) to Tagged binary
communications protocol.
When the Binary setting is set to On, TBCP
is not available. Use the Binary protocol.
See "PS3 Menu" on page 171 for details.

Advertisement

Table of Contents
loading

Table of Contents