Epson EPL-N2550 Series User Manual page 52

❏ When printed envelopes are wrinkled, open Cover B and push up
the form feed pressure change levers at both sides of the fuser unit
until they are in the vertical position. It may reduce the wrinkles in
the envelopes. When using paper other than envelopes, be sure to
push the levers back down.
Warning:
w
Unless specifically instructed in this guide, be careful not to touch
the fuser, which is marked CAUTION HOT SURFACE and
CAUTION HIGH TEMPERATURE, or the surrounding areas. If
the printer has been in use, the fuser and the surrounding areas
may be very hot. If you must touch one of these areas, wait 40
minutes to allow the heat to subside before doing so.
When loading envelopes, you should make paper settings as
shown below:
Paper Source
MP Tray Size setting in the
Tray Menu
Printer driver settings
52
Paper Handling
MP tray (up to 10 envelopes)
Mon, C10, DL, C5, C6, IB5
Paper Size: Mon, C10, DL, C5, C6, IB5
Paper Source: MP tray