Setting up your Refrigerator
Spacer
Flooring
30
English
RB7000J_DA68-03846L-00_EN.indd 30
NOTE
Remove paper on spacer and then attach
a spacer (Gray block) on the back side of
refrigerator for better performance. Make
Spacer
sure a spacer fix like above image when
you install the refrigerator. It is improving
the refrigerator performance. If You set the
<Back>
refrigerator in furniture, the spacer should
be removed for the door-flushing with
furniture.
For proper installation, this refrigerator
must be placed on a level surface of hard
material that has the same height as the
rest of the flooring. This surface should be
strong enough to support a fully loaded
refrigerator. To protect the floor finish, cut
a large section of the cardboard carton and
place it under the refrigerator where you
are working.
NOTE
Pulling or pushing the refrigerator may
damage the floor. Moving the refrigerator
after installation may damage the floor.
2019-02-25
8:09:43