Removal and Replacement Procedures
5.3 Preparing the Computer for
Disassembly
Perform the following steps before disassembling the computer:
1. Turn off the computer.
2. Disconnect the AC adapter and all external devices.
3. Remove the battery pack by following these steps:
a. Turn the computer bottom side up with the left side
b. Slide and hold the battery release latch
c. Use the notch in the battery bay to slide the battery pack
d. Remove the battery pack.
Figure 5-2. Removing the Battery Pack
Reverse the above procedures to install the battery pack.
5–4
facing forward.
of the computer (Figure 5-2).
out of the battery bay
2
.
Maintenance and Service Guide
toward the back
1