Compaq Evo N800c Series Maintenance And Service Manual page 102

Removal and Replacement Procedures
5. Position the computer so the front faces forward and open the
computer.
6. Disconnect the display video 1 and display inverter 2 cables
from the system board (Figure 5-19).
7. Remove the two PM2.0 × 10.0 screws 3 that secure the
display hinges to the base enclosure.
8. Lift the display straight up 4 and remove it from the base
enclosure.
Figure 5-19. Removing the Display
5–24 Maintenance and Service Guide