Compaq Evo N800c Series Maintenance And Service Manual page 125

Hewlett-packard notebook maintenance and service guide
Hide thumbs Also See for Evo N800c Series:
Table of Contents

Advertisement

5. Remove the two PM2.0 × 5.5 screws 1 that secure the system
board to the base enclosure on either side of the MultiBay
connector (Figure 5-34).
6. Remove the two PM2.0 × 8.0 screws 2 that secure the system
board to the base enclosure through the processor support
bracket.
Figure 5-34. Removing the System Board Screws
Maintenance and Service Guide
Removal and Replacement Procedures
5–47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Presario 2800Evo n800v seriesEvo n800w seriesEvo n800wEvo notebook n800c seriesEvo notebook n800v series ... Show all

Table of Contents