If The Card Is Not Recognized (Card Check) - Olympus Stylus 400 Digital Reference Manual

If the card is not recognized (card check)

When the power is turned on, the camera checks the card automatically. If
there is no card in the camera or a card that is not supported by this camera
is inserted, the following screen is displayed.
• All data stored on the card is erased when the card is formatted.
Note
Monitor indication
NO CARD
CARD%SEtUP
POWER%OFF
FORMAt
SELECt GO
Corrective action
There is no card in the camera or the card is not
inserted properly.
Insert a card. If a card is already inserted, remove
it and insert it again correctly.
The card cannot record, play back or erase pictures.
Replace it with a new one or format the card.
Press to select POWER OFF, then press
. Replace it with a new one.
Format the card.
Press to select
to display the confirmation screen.
Select YES and press
Formatting starts. If the card was successfully
formatted, the camera is ready to take pictures.
Power on/off
FORMAT, then press
.
1
27