Power
on/off
If the card is not recognized (card check)
When the power is turned on, the camera checks the card automatically
If
there is no card in the camera or a card that is not supported
by this camera
is inserted, the following screen is displayed
Monitor indication
D
NO CARD
Corrective action
There is no card in the camera or the card is not
inserted properly.
Insert a card
If a card is already inserted,
remove it and insert it again correctly
The card cannot record, play back or erase
3ictures
Format the card or replace it with a new
one
Press _,
to setect POWER OFF, then press
@ Replace the card with a new one
Format the card.
Press _G_,
to select [_ FORMAT, then press
@ to display the confirmation
screen. Select
YES and press @.
Formatting
starts
If the card was successfully
formatted, the camera is ready to take pictures.
• All data stored on the card is erased when the card is formatted.
Note
26