Table of Contents
Advertisement
Back to top
3.3.2 Printing Quality
Perform the test print with the factory settings and check that there is no problem with printing quality.
1
Place the label on the printer.
2
>
Select [Settings]
3
After printing multiple labels, select [
Media feed
Is there any quality degradation compared with the test print before starting work?
1
Is the print quality uniform?
2
If the print quality is not uniform and hard to correct, lower the print darkness, and then check the
test print results again.
Is printing shrunk
3
Pay attention to the ruled lines. If the ruled lines are missing, check the drive part as it may be the cause.
3 Checking and Performing Printer Adjustments
>
[Tools]
[Test Print]
direction
>
>
[Factory]
[
] (right select button).
] (right select button) to stop the printing.
2 min
PW4NX Service Manual
35
Advertisement
Table of Contents
