Trane Symbio 700 Controller Application Manual page 11

Figure 4. Symbio 700 Bluetooth status
4. Start the mobile app on your smart device.
5. On the login screen, tap View Available Devices in the lower section of the screen. Or Trane
6. On the Unit List page, select the Symbio 700 controller that you want to pair with. If the controller is
7. When prompted, pair the app to the Symbio 700 controller. A popup message displays a 6-digit
Figure 5. Bluetooth pairing
8. Tap
Important: To keep the list of previously-connected devices manageable, the Bluetooth smart devices
The Symbio Installation and Service tool is required to view and configure the following:
•
ACC-APG002A-EN
personnel can login using their Trane Connect username and password.
not listed, tap the refresh arrow in the upper right-hand corner of the screen.
random number. The same number is shown on the display of the Symbio 700 controller until the
pairing is complete, allowing the user to confirm connection to the intended controller.
on the Symbio 700 on-board keyboard/display to complete the connection.
list is limited to 10 devices. When 10 or more Bluetooth devices are defined on the smart
device, connection to the Symbio 700 controller is not allowed.
• iOS devices - delete any unused devices until there are less than 10 items.
• Android devices - the devices list is automatically limited to 10 items.
Building Automation System configuration (Advanced Controller Configuration)
– BACnet® over Zigbee® (Air-Fi™ Wireless)
– BACnet IP (Internet Protocol)
– BACnet MS/TP
Symbio 700 Overview
11