Specifying Multiboot Preferences; Setting A Continuing Startup Sequence - Compaq 285558-001 Software Manual

Specifying MultiBoot Preferences

You can set either:
I
A continuing startup sequence that the notebook uses each
time it starts up.
or
I
A variable startup sequence, called MultiBoot Express, that
sets the notebook to prompt you for a startup location each
time it is started or restarted.
You set the MultiBoot Express timeout as you set up the prompt.
If you do not press a key or select a startup medium within the
timeout, the notebook continues startup according to the current
MultiBoot sequence.

Setting a Continuing Startup Sequence

To set a startup sequence that the notebook will use each time it is
started or restarted:
1. Restart the notebook, then press
Based Setup message is displayed in the lower left of the
screen.
❏
❏
2. Use the arrow keys to select Advanced > Boot Options, then
press
3. Toggle the MultiBoot field to Enable.
4. Toggle the Boot Order fields to the boot sequence you prefer.
5. To save your preferences and exit Computer Setup, use the
arrow keys to select File > Save Changes and Exit, then
follow the instructions on the screen.
Your preferences are set as you exit Computer Setup and are in
effect when the notebook restarts.
Software Guide
To change the language, press
For navigation instructions, press
enter.
MultiBoot (Advanced Users Only)
while the F10 = ROM
F10
F2.
F1.
5–5