Selecting Easy Cd Creator Settings - Compaq 285558-001 Software Manual

To erase DirectCD formatting from a rewritable medium so the
medium can be used with Easy CD Creator or CD Copier:
1. Insert the medium into an optical drive. (If you are prompted
to install UDF Reader, refer to the "Responding to the UDF
Prompt" section.)
2. Access the Easy CD Creator Basic Eraser:
❏
❏
3. Select the Erase button.
4. Select the OK button.

Selecting Easy CD Creator Settings

To use DirectCD, Easy CD Creator, or CD Copier, you must
select the settings shown in the following table. These settings are
compatible; for example, the settings for DirectCD do not conflict
with the settings for CD Copier.
The Easy CD Creator software installs with all of these settings
selected. Before beginning any copying procedure, you may want
to confirm that these settings are selected.
Application
DirectCD
Easy CD Creator
CD Copier
Software Guide
In Windows 2000 Professional, select Start > Programs
> Easy CD Creator Basic > CD-RW Eraser.
In Windows XP Home or Windows XP Professional,
select Start > All Programs > Easy CD Creator Basic >
CD-RW Eraser.
Required Settings
Enable Auto Insert Notification
Disable Disk-at-Once
and
Enable Track-at-Once
Disable Disk-at-Once
CD and DVD Software
1–17