Oki B710n User Manual page 95

Symptom Explanation
Cannot Is the READY light off?
print. If so, this printer is off-
line or in menu setting
mode.
Is there a message
displayed on the control
panel?
When a parallel cable is
used for connection, are
you using a computer
that supports
bidirectional
communication?
The printer has
insufficient memory to
print the job.
Print job is The interface cable may
sent, but be disconnected.
the R
EADY
light is not
Is the interface
on.
configured?
The computer
environment is not
correctly set up.
B710 B720 B730 User's Guide > 95
Action
Check the control panel
display:
"Off-line"
Press <On Line>
Others
Press the Back Arrow button to
exit the menu setting mode.
Follow the message to rectify
the problem.
See page 103
By default, the printer's
bidirectional communication
setting is set to [Enable]. If
the computer is not
responding to bidirectional
communication, printing
cannot be done.
Turn the bidirectional
communication setting to
[Disable] on the control panel
and then print again.
If the printer driver is set to
[1200dpi] on the [Graphics]
tab, change it to [600dpi].
Install additional memory
(optional) in the printer.
Reduce the complexity of the
print job.
Turn off the power and check
the connection of the interface
cable.
Check the port status of the
interface.
Check the computer
environment, such as the
printer driver.