Menus\ Tray Configuration Menu - Oki B710n User Manual

Menus\ Tray Configuration Menu

Default settings are in bold face type.
Submenus
Paper Feed
Auto Tray Switch
Output Tray
Output Linking
Unit Of Measure
Tray1 Auto-Sense
Tray1 Paper size
Tray1 Media Type
Tray1 X Dimen
Tray1 Y Dimen
Tray2 Auto-sense
Tray2 Paper size
Available Settings
Tray 1, Tray 2, Tray 3, Tray 4
On, Off
Face Down Tray, Offset Tray
On, Off
inch, Millimeter
On, Off
Letter, B5, A5, A6, Statement, Executive, C5
Envelope DL Envelope, Com10 Envelope, Monarch
Envelope, Com9 Envelope, Oficio, Legal13, Legal14,
A4, Custom
Note: Tray1 Auto-Sense must be off to use this
feature.
Plain, Transparency, Pre-punched, Letterhead,
Colored, Preprinted, Bond, Label, Card Stock,
Postcard, Envelope, Thick 1, Thick 2, Thick 3, Thin,
Other
3.00 - 8.50 inches
(76 - 216 mm)
Tray1 Paper Size must be set to Custom to use this
feature
5.00 - 48.00 inches
(127 - 1219 mm); default = 11.00 inch, 279 mm)
Tray1 Paper Size must be set to Custom to use this
feature.
ON,
OFF
Letter, B5, A5, A6, Statement, Executive, C5
Envelope DL Envelope, Com10 Envelope, Monarch
Envelope, Com9 Envelope, Oficio, Legal13, Legal14,
A4, Custom
Note: Tray2 Auto-Sense must be off to use this
feature.
B710, B720, B730 User's Guide > 46