Table of Contents
Advertisement
Installing the riser card
Prerequisites
1. Follow the safety guidelines listed in
Safety
instructions.
2. Follow the procedure listed in
Before working inside your
system.
Steps
1. Align and insert the riser card with the screw holes on the riser.
2. Using a Phillips 2 screwdriver, tighten the screws that secure the riser card to the expansion card riser.
NOTE:
The procedure to install the riser 1B card is similar to installing the riser 1A card.
Figure 45. Installing the riser card in riser 1
72
Installing and removing system components
Advertisement
Table of Contents
