Installing the End-Weight
Install the end-weight onto the cutting unit
Note: Use
Figure 1
to determine where to properly place
end-weight.
1
1. Bolt
2. Counterweight
Note: Torque the bolts to 36.6-44.7 N-m (27–33 ft-lbs).
For hybrid machines with model numbers 03405 and
03411 only: Before installing the reelmotor, replace the
shoulder bolt with a special shoulder bolt as shown in
3.
Note: The special shoulder bolt prevents interference with
the electric motor.
(Figure
3
2
Figure 2
3. O-ring
2).
1. Special shoulder bolt
g027510
Figure
2
Figure 3
1
g02751 1