Beat Matching Using Pitch Bend - Numark CDN34 User Manual

CDN-34

BEAT MATCHING USING PITCH BEND

Beat matching is necessary when the BPM's are the same of both songs, however, the drum beats are not hitting at the
same time.
This is a description of the procedure for matching the beat of PLAYER 1 and PLAYER 2 using the PITCH BEND button.
(This procedure can be done on either PLAYER).
After matching the BPM's adjust the pitch
temporarily as follows:
When PLAYER 2 is ahead press the -- When PLAYER 2 is behind press the +
or rotate the jog wheel counter clockwise or rotate the jog wheel clockwise
or or
The pitch changes automatically while the + or -- button is being pressed or the jog wheel is rotated. The faster
you rotate the wheel the more you change. Releasing the button or wheel results in a return to the original pitch. (So the
BPM's are once again the same.)
- The Leader in DJ Technology
19
©1999
Industries http://www.numark.com