Numark CDN-24S Operating Manual

Numark CDN-24S Operating Manual

Professional dual cd player

Advertisement

Quick Links

®
Professional Disc Jockey Products
CDN-24S
PROFESSIONAL DUAL CD PLAYER
OPERATING MANUAL
©1999
Industries
http://www.numark.com

Advertisement

Table of Contents
loading

Summary of Contents for Numark CDN-24S

  • Page 1 ® Professional Disc Jockey Products CDN-24S PROFESSIONAL DUAL CD PLAYER OPERATING MANUAL ©1999 Industries http://www.numark.com...
  • Page 2: Safety And Registration

    6. Heat - Avoid placing this product to close to any high heat sources such as radiators. ©1999 Numark Industries 7. Ventilation - The appliance should be situated so that it’s location or position does not interfere with it’s proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation opening;...
  • Page 3 Please return the enclosed warranty card to register your CD player with us. MODEL: __________________________ PURCHASED FROM:_________________________ SERIAL NUMBER:___________________ DATE OF PURCHASE:________________________ ©1999 Numark Industries NOTICE CONCERNING FCC REGULATIONS This equipment generates and uses radio frequency energy and may cause interference to radio and...
  • Page 4: Introduction

    CD PLAYER WITH REMOTE CONTROLLER CONGRATULATIONS... You have just purchased a dual CD player designed specifically for the professional DJ. This unit has been designed to provide CD mixing with the same ease and creativity that you have enjoyed with records. Please take a few moments to familiarize yourself with the CDN-24 by reading the following information before attempting to operate the unit.
  • Page 5: Table Of Contents

    Beat Matching Using Pitch Bend Relay and Fader Start Example of Mixing Before Switching off the Power Troubleshooting Guide Information and Specifications Warranty ©1999 Numark Industries TABLE OF CONTENTS - The Leader in DJ Technology - 5 - CDN-24S http://www.numark.com...
  • Page 6 1) DUAL-TRANSPORT PLAYER UNIT 1) REMOTE CONTROL UNIT 1) OWNERS MANUAL (THIS BOOKLET) 2) RCA CONNECTING CABLES 2) CONTROL CABLES 1) FADER START CABLE 1) IEC POWER CORD ©1999 Numark Industries - The Leader in DJ Technology - 6 - http://www.numark.com...
  • Page 7: Set-Up Instructions & Connections

    DIGITAL OUTPUTS: This CD player is specially equipped with digital outputs. The format is type 2, form 1, also known as S/PDIF (Sony/Phillips Digital Interface Format). In order to use the digital output you must activate the rear panel switch.
  • Page 8: Remote Control Unit

    ©1999 Numark Industries SEARCH WHEEL (OUTER RING) - This wheel has 3 forward and 3 reverse speed positions for searching through songs.
  • Page 9: Display

    4. PROGRAM - Used for preprogramming the track order to automatically be played by the unit. This is a great function if you need to leave the CD player alone. 5. TIME MODE - (Elapsed) is for showing time as it is taking place.
  • Page 10: Play, Pause And Cue Operations

    EDITING CUE POINT When the inner search dial is turned while a cue point is set, a new cue point can be located. The CD player will repeatedly play small parts of the CD as you move it to the desired position.
  • Page 11: Matching The Tempo

    Match the tempo by monitoring the music of both PLAYER 1 and PLAYER 2 by ear and adjusting the pitch. When the tempo of the music of the selected CD player is slow compared to the tempo of the other player, move the slider to the ( + ) side and match the tempo.
  • Page 12: Relay And Fader Start

    Play will stop at the end of the last track. FADER-START MODE This mode is achievable by attaching both sides of your CD player to a similarly equipped DJ mixer. 1. Connect cables between the CD remote unit and your DJ mixer.
  • Page 13: Example Of Mixing

    EXAMPLE OF MIXING USING BOTH PLAYERS OF YOUR CD PLAYER While playing a disc on PLAYER 1 load a disc into PLAYER 2 and select your next track, match its pitch to the track playing on PLAYER1 and when you are ready use the crossfader on your mixer to fade from PLAYER 1 to PLAYER 2.
  • Page 14: Before Switching Off The Power

    CDN-24S BEFORE SWITCHING OFF THE POWER: When you have finished using the CD player, be sure that the disc tray is closed with the “OPEN/CLOSE” button before switching off the power . DO NOT switch off the power when the disc holder is open.
  • Page 15: Information And Specifications

    Control Unit: 482 (W) x 132 (H) x 74 (D) mm (without feet) Weight: Player Unit: 5 Kgs., 11 lbs. Control Unit: 2 Kgs., 4.4 lbs. Power Supply: Power Consumption: ©1999 Numark Industries 16-bit linear/channel, 3 beam laser 8 times 20Hz-20KHz 86dB 0.01% 94dB 2.0Vrms...
  • Page 16: Warranty

    NUMARK dealer and continuing for the following period of time after that date for (2) Years. The warranty is extended to (3) Years with the completion of the warranty card provided that the warranty card is completed and returned within (30) days from the date of purchase.

This manual is also suitable for:

Cdn24

Table of Contents