Numark CDN-20S Operating Manual

Numark CDN-20S Operating Manual

Professional dual cd player

Advertisement

Quick Links

®
Professional Disc Jockey Products
CDN-20S
PROFESSIONAL DUAL CD PLAYER
OPERATING MANUAL
©2000
Industries
http://www.numark.com

Advertisement

Table of Contents
loading

Summary of Contents for Numark CDN-20S

  • Page 1 ® Professional Disc Jockey Products CDN-20S PROFESSIONAL DUAL CD PLAYER OPERATING MANUAL ©2000 Industries http://www.numark.com...
  • Page 2: Safety Instructions

    6. Heat - Avoid placing this product to close to any high heat sources such as radiators. ©2000 Numark Industries 7. Ventilation - The appliance should be situated so that it’s location or position does not interfere with it’s proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation opening;...
  • Page 3: Line Voltage Selection

    Please return the enclosed warranty card to register your CD player with us. MODEL: __________________________ SERIAL NUMBER:___________________ ©2000 Numark Industries NOTICE CONCERNING FCC REGULATIONS This equipment generates and uses radio frequency energy and may cause interference to radio and...
  • Page 4 CD mixing with the same ease and creativity that you have enjoyed with records. Please take a few moments to familiarize yourself with the CDN-20S by reading the following information before attempting to operate the unit.
  • Page 5: Mounting Your Cd Player

    1. Mount the units in your console or rack with 19” EIA rails 2. The transport should be mounted not to exceed an angle of 15 degrees. 3. Your CD player can be affected by excess vibration so mount the units in a secure environment if possible.
  • Page 6 If fader start cables are attached to a fader start mixer, then, the actions of the mixer can control to CD player. Instructions for this should be found in the mixer manual. Both functions are active simultaneously. - The Leader in DJ Technology - 6 - http://www.numark.com...
  • Page 7: Lcd Display Features

    The unit should always be shut down with this button first before any external power is removed. 18. RCA AUDIO JACKS - Connect your CD player to your mixer from this line level output. 19. VOLTAGE SELECTOR - Set this switch to the voltage for your location.
  • Page 8 When the “LOOP” button is pressed again the CD will continue on when it gets to the end point. - The Leader in DJ Technology ©2000 Numark Industries http://www.numark.com - 8 -...
  • Page 9: Matching The Beats Per Minute (Bpm)

    Match the tempo by monitoring the music of both PLAYER A and PLAYER B by ear and adjusting the pitch. When the tempo of the music of the selected CD player is slow compared to the tempo of the other player, move the slider to the (+) side and match the tempo.
  • Page 10 CDN-20S EXAMPLE OF MIXING USING BOTH PLAYERS OF YOUR CD PLAYER While playing a disc on PLAYER A load a disc into PLAYER B and select your next track, match its pitch to the track playing on PLAYER A and when you are ready use the crossfader on your mixer to fade from PLAYER A to PLAYER B.
  • Page 11: Before Switching Off The Power

    BEFORE SWITCHING OFF THE POWER: When you have finished using the CD player, be sure that the disc tray is closed with the “OPEN/CLOSE” button before switching off the power. DO NOT switch off the power when the disc holder is open.
  • Page 12: Return Information

    Professional Disc Jockey Products What is covered and for how long? NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S DJ mixers and amplifiers are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing for the following period of time after that date for (2) Years.

Table of Contents