Related Manuals for Numark CDN-32S
Summary of Contents for Numark CDN-32S
- Page 1 ® Professional Disc Jockey Products CDN-32S PROFESSIONAL DUAL CD PLAYER with Buffered memory OPERATING MANUAL ©1999 Industries http://www.numark.com...
-
Page 2: Safety Instructions
6) Heat - Avoid placing this product to close to any high heat sources such as radiators. ©1999 Numark Industries 7) Ventilation - The appliance should be situated so that it’s location or position does not interfere with it’s proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation opening;... - Page 3 Please return the enclosed warranty card to register your CD player with us. MODEL: ___________________________ SERIAL NUMBER: __________________ ©1999 Numark Industries NOTICE CONCERNING FCC REGULATIONS This equipment generates and uses radio frequency energy and may cause interference to radio and...
- Page 4 PROFESSIONAL DUAL CD PLAYER CONGRATULATIONS... You have just purchased a dual CD player designed specifically for the professional DJ. This unit has been designed to provide CD mixing with the same ease and creativity that you have enjoyed with records. Please take a few moments to familiarize yourself with the CDN-32 by reading the following information before attempting to operate the unit.
- Page 5 Relay and Fader Start Example of Mixing Before Switching off the Power Troubleshooting Guide Information and Specifications Warranty ©1999 Numark Industries TABLE OF CONTENTS CHECK TO BE SURE THE FOLLOWING ITEMS ARE IN THIS BOX: 1) DUAL-TRANSPORT PLAYER UNIT 1) REMOTE CONTROL UNIT...
- Page 6 When the CD is first placed in the tray and a track is selected, the CD player quickly reads the beginning of the track and stores it into a buffer memory, the same way a computer stores information in RAM. This initial operation takes about 5 seconds.
-
Page 7: Mounting Your Cd Player
DIGITAL OUTPUTS: This CD player is specially equipped with digital outputs. The format is type 2, form 1, also known as S/PDIF (Sony/Phillips Digital Interface Format). In order to use the digital output you must activate the rear panel switch. - Page 8 The pitch will automatically drop while the ©1999 Numark Industries button is pressed (allowing “fall back”) and return to the original pitch when the button is released. By changing the pitch of one disc with respect to the other in this way the beats can be matched.
- Page 9 PROGRAM - Used for preprogramming the track order to automatically be played by the unit. This is a great function if you need to leave the CD player alone. g) TIME MODE - (Elapsed) is for showing time as it is taking place.
- Page 10 CD as you move it to the desired position. By pressing “PLAY/PAUSE” then “CUE” you can confirm that this new cue point is desirable - The Leader in DJ Technology ©1999 Numark Industries http://www.numark.com - 10 -...
-
Page 11: Beat Matching Using Pitch Bend
Match the tempo by monitoring the music of both PLAYER 1 and PLAYER 2 by ear and adjusting the pitch. When the tempo of the music of the selected CD player is slow compared to the tempo of the other player, move the slider to the ( + ) side and match the tempo. When faster, move the pitch slider to the ( - ) side. -
Page 12: Relay Play
Play will stop at the end of the last track. FADER-START MODE This mode is achievable by attaching both sides of your CD player to a similarly equipped DJ mixer. 1. Connect cables between the CD remote unit and your DJ mixer. - Page 13 EXAMPLE OF MIXING USING BOTH PLAYERS OF YOUR CD PLAYER While playing a disc on PLAYER 1 load a disc into PLAYER 2 and select your next track, match its pitch to the track playing on PLAYER1 and when you are ready use the crossfader on your mixer to fade from PLAYER 1 to PLAYER 2.
-
Page 14: Troubleshooting
CDN-32S BEFORE SWITCHING OFF THE POWER: When you have finished using the CD player, be sure that the disc tray is closed with the “OPEN/CLOSE” button before switching off the power. DO NOT switch off the power when the disc holder is open. - Page 15 Control Unit: 482 (W) x 88.8 (H) x 74 (D) mm (without feet) Weight: Player Unit: 5 Kgs., 11 lbs. Control Unit: 2 Kgs., 4.4 lbs. Power Supply: Power Consumption: ©1999 Numark Industries 16-bit linear/channel, 3 beam laser 8 times 20Hz-20KHz 86dB 0.01% 94dB 2.0Vrms...
- Page 16 NUMARK dealer and continuing for the following period of time after that date for (2) Years. The warranty is extended to (3) Years with the completion of the warranty card provided that the warranty card is completed and returned within (30) days from the date of purchase.