Table of Contents
Advertisement
OPERATION
OPERATION
OPERATION
WI - FI CONNECTION
Please follow below steps to set up and operate Wi-Fi functions.
1.
Prepare a Wi-Fi wireless router that can access the Internet, The Wi-Fi frequency band is required to be
2.4 Ghz and it should be placed within 10 meters of the water heater to ensure that a strong Wi-Fi signal is
available.
2.
Turn on Wi-Fi and Bluetooth on your device. After the connection is successful, you can turn off Bluetooth
and operation will not be affected.
3.
Scan the QR code below or search in the app market to download and install the 'Smart Life' App.
•
iOS users – please download from App Store
•
Android users – please download from Google Play
4.
After completing the installation, open the App, register an account and log in according to the App prompt.
5.
To connect the controller to your network Press and hold the On/Off and the Up (
to enter into manual network connection mode. When the controller is available for connecting to a Wi-Fi
network, the symbol "
lit up.
You will need to repeat step 5 if the icon stops flashing during the connection
NOTE
6.
Connect to the SmartLife App as follows:
i) Search for Device
Rinnai
" will flash. When connected successfully, the symbol "
ii) Add Found Device
26
)keys together for 5s,
" will remain continously
1.
2.
iii) Connect to Wi-Fi
EHPS Heat Pump OIM - Issue 1
Advertisement
Table of Contents
