6. Disconnect the cables from the rear drive module.
NOTE:
Refer to
cable routing
Table 77. Rear drive bay slot numbers
Configurations with four rear drives
12 x 3.5-inch SAS/SATA + 4 x 2.5-inch SAS/
SATA
12 x 3.5-inch SAS/SATA + 4 x 2.5-inch NVMe
24 x 2.5-inch SAS/SATA + 2 x 2.5-inch SAS/
SATA
24 x 2.5-inch SAS/SATA + 2 x 2.5-inch NVMe
Steps
1. Using a Phillips #2 screwdriver, loosen the captive screws that secure the rear drive module to the system.
2. Lift the rear drive module from the system.
114
Installing and removing system components
section for more information.
Bay0 slot numbers
Slot 0, 1, 2 and 3
Slot 0, 1, 2 and 3
N/A
Slot 0, 1, 2 and 3
Bay1 slot numbers
N/A
N/A
Slot 24, 25, 26 and 27
N/A