Workstation Software - Bay Networks Remote Annex Quick Start Manual

Remote Annex Quick Start for Windows
166-024-858
4
To install Remote Annex software on the server:
1. Put the CD-ROM into the Windows NT server's CD drive.
2. Use the File Manager to select the CD-ROM disk.
3. Double-click on the setup.exe file.
4. Once the setup program runs, the Welcome window
appears. Click
Refer to the Installing Remote Annex Network Software for Windows for
installation details.

Workstation Software

Remote Annex software can be installed on other Windows platforms on
the Windows NT network:
• The na and Quick2Config Annex software can be loaded on
Windows NT Workstations (3.51 or 4.0) and on Windows 95
platforms.
• Quick2Config Annex can be installed on Windows for
Workgroups 3.11 and Windows 3.1 systems.
To install Quick2Config Annex on a Windows platform:
1. Put the CD-ROM into the Windows NT server's CD drive.
2. Use the File Manager to select the CD-ROM disk.
3. Double-click on the setup.exe file.
4. Follow the dialog box instructions to select Install Software
and then Quick2Config Annex.
5. When prompted for an installation directory, accept the
default directory for each software module.
Rev. A
to continue the installation process.
Next