Nautica Wizard Installation Guide
Other Connection Options
Adding a Path to an ISP or Intranet
Figure 5-1.
5-2
The Installation Assistant allows you to connect to one ISP or
intranet. If you want to connect to more than one ISP or intranet,
you need to make these extra connections manually. Use the
Installation Assistant to connect to one ISP (Chapter 2) or one
intranet (Chapter 3), then set up the other connections by creating
paths that point to these networks.
To add a new path:
1.
In the Nautica Wizard window, click on the router for
which you want to set up new path.
Nautica Wizard Window
2.
If the Paths option is not available, you need to configure
one ISP or intranet using the Installation Assistant.
302269-A Rev.00