Nortel MCC3100 Release Note page 10

Copyright © 2007 Nortel Networks
•
•
NN42030-400 MCC 3100 for Windows Mobile Standard 01.03 November 2007
When with two cellular calls, one being held and one active, there
are two call log entries in Call Log. If the held party terminates the
call, the log entry still shows two calls, one active and one held.
This is due to the device TAPI interface does not deliver such
notification of far-end termination of the held call in time for MC to
process and update the view. Thus MC is not able to update the
Call Log and Session views accordingly. The MC error in not
updating the views will be fixed for the situation where all calls are
terminated and the pending events are delivered in the next update
release.
PR5297: MC display not updated correctly when soft-keyboard is
used and screen orientation is changed from portrait to landscape
mode
This is recognized as a display update issue, and will be fixed in the
next maintenance release. In the mean time, to work around the
issue, close the soft keyboard, and change to a different screen
orientation. Then change back to the original screen orientation
that initially encountered this problem.
PR6510: MC does not support Bluetooth Call Swap
Some BT devices support advanced BT call features. MC does not
support the features available for selected devices, but rather it
supports the basic Bluetooth specification supported by most
devices
10