Nortel MAS Software Manual page 35

8
9
10
Procedure 12
Restoring a partial service data backup archive
Step
From the Media Application Server Console
1
2
3
4
5
6
Copyright © 2007, Nortel Networks
.
Note: If you used the default automatically generated filename
when you created the system data backup, the backup archive
filename begins with MASSVC_FULL.
Click Open to restore the full service data from the archive file.
After the restore is complete, you must return the Media Application
Server to service.
Right-click the Control Panel icon and select Operations > Start to
activate the Media Application Service.
After the Media Application Service starts, it returns to the previously
locked state. You must unlock the MAS before it can accept new
service requests.
Right-click the Control Panel icon and select Operations > Unlock.
The Media Application Server is online and accepts new service
requests.
Action
Right-click the Control Panel snap-in icon in the Console tree to
access the Operations submenu.
Select Operations > Pending Lock to prevent the Media Application
Server from accepting new service requests and to allow existing
service sessions to end.
Allow all existing service sessions to end or wait until an acceptable
low number of existing service sessions remain.
Right-click the Control Panel icon and select Operations > Lock to
end any remaining service sessions.
Right-click the Control Panel icon and select Operations > Stop to
place the Media Application Server offline.
Right-click the Control Panel snap-in icon in the Console tree to
access the Backup/Restore submenu.
Select Backup/Restore > Service Data (Partial) > Restore to
display the Restore Service Backup Archive file browser window.
Nortel Media Application Server
MAS IM Chat Fundamentals
NN42020-131 01.04 Standard
4.0 27 July 2007
—End—
Administration 35