Loading The Rack Server - Compaq PROLIANT 3000 Setup And Installation Manual
Compaq computer hardware user manual
Hide thumbs
Also See for PROLIANT 3000:
- Maintenance and service manual (162 pages) ,
- Setup and installation manual (143 pages) ,
- Reference manual (198 pages)
Table of Contents
Advertisement
3-22
Rack-Mount Server Installation
Loading the Rack Server
Load and secure the server to the rack with the face plate thumbscrews before
continuing to attach any more mounting bracket assemblies. Ensure that this
pair of brackets is perfectly aligned and installed and that the server fits before
you continue.
WARNING:
the equipment, a minimum of two people MUST lift the server
into the rack. The server weighs 50 pounds (22.6 kilograms). If
the unit is to be loaded above chest level, a third person must
assist in aligning the rails while the other two support the unit.
IMPORTANT:
To make the server lighter and more manageable, do not
install drives in the server until after you load the server into the rack. You
may also temporarily remove power supplies and reinstall them after you
have mounted the server in the rack.
To reduce the risk of personal injury or damage to
Advertisement
Table of Contents
