Extending The Server From The Rack - Compaq ProLiant DL380 Generation 2 Maintenance And Service Manual

2-4 Compaq ProLiant DL380 Generation 2 Server Maintenance and Service Guide

Extending the Server from the Rack

To extend the server from the rack:
1. Loosen the front panel thumbscrews that secure the server faceplate to the front of the
rack.
2. Extend the server until the server rail-release latches engage.
Figure 2-1. Extending the server from the rack
3. After performing the maintenance procedure, slide the server back into the rack:
a. Press the server rail-release latches.
b. Slide the server fully into the rack.
c. Secure the server by tightening the thumbscrews.
WARNING: To reduce the risk of personal injury, be careful when pressing the server
rail-release latches and sliding the component into or out of the rack. The sliding rails could
pinch your fingertips.