Installation Overview - Nortel CallPilot Mini Installation Manual

Software Keycode Installation Guide
Introduction
This document provides instructions for enabling Software Keycodes. Predefined
bundles of keycodes may be ordered as a single part although individual keycodes
must be entered to enable specific features.

Installation overview

The installer is responsible for obtaining and enabling the Software Keycode(s).
Only registered users can access the Keycode Retrieval System. Click on the
Register banner to apply for registration.
Determining the system identification number
You need the system identification number for your system, before you can obtain
a Software Keycode.
Determining the CallPilot Mini/CallPilot 150 system identification number
To determine the system identification number:
1. Log on to CallPilot Manager.
For information about how to log on to CallPilot Manager, refer to the
CallPilot Manager Set Up and Operation Guide.
2. Click the Installed Options link.
The system identification number appears in the Serial Number box.
3. Write system identification number on page 6 of this guide.
Determining the Business Communications Manager system identification
number
To determine the system identification number:
1. Log on to Unified Manager.
For information about how to log on to Unified Manager, refer to the Business
Communications Manager Programming Operations Guide.
2. Click the System key and then click the Licensing heading.
The system identification number appears in the System Identifier box.
3. Write system identification number on page 6 of this guide.
PO909884 Issue 03 Software Keycode Installation Guide