Connecting The Loewe Speaker System - Loewe Individual 55 Manual

n
Individual 40-55
User guide
External devices

Connecting the Loewe speaker system

Set-up
The arrangement of speakers and TV set can look like the illustration
below:
Front
left
Stereospeaker I 40/46/55
Surround
left
Example for placing the Loewe sound system
The front and surround speakers should be installed symmetrically
to the TV set and to your sitting position.
You can position the subwoofer anywhere on the floor. We recommend
placing it in front asymmetrically next to the TV set.
If you use another speaker than the Stereospeaker I 40 / 4 6 / 5 5 to be
the centre speaker, place it in the middle below the TV set.
For the manual settings in the sound components wizard enter the
distances of the centre speaker, and the front and surround speak-
ers to your sitting position. This guarantees a natural spatial image
of the sound.
as centre speaker
Subwoofer
- 130 -
Connection
Switch off all devices before connecting them.
The subwoofer is connected to the TV set via the DIGITAL AUDIO
LINK interface. Plug a network cable (Category 5e or higher) to the
DIGITAL AUDIO LINK port of the TV set. Connect the Ethernet cable
to the RJ45 socket of the Digital Audiolink / Audiolink converter
available as accessory. Connect the converter to the AUDIO LINK
Front
right socket of the Subwoofer.
Digital Audiolink / Audiolink
Surround
right
Connection of the Loewe Individual Speaker system to the TV set
Connecting the speakers to the subwoofer
further information on the wiring of the speakers you find the the
instruction manual of the speaker system.
Sound reproduction via the speaker system
The sound reproduction by the speaker system can be adjusted in the
sound components wizard.
Further information on settings for the speaker system you find start-
ing from page 120.
Ethernet cable
(Cat. 5e or higher)
Converter
TV set
Subwoofer