Bundling The Cables; Preparing The Remote Control Unit - Loewe Individual 55 Manual

n
Individual 40-55
User guide
Preparing the TV set

Bundling the Cables

The cables connected to the TV set can be bundled and fixed to the
back of the housing using the cable supports (Individual 40/46) as
well as Velcro cable ties (Individual 55) provided.
Individual 40/46
Unlatch the two cable supports (A) at the rear panel of the TV set,
bundle the cables and click the cable support into the rear panel again.
A
Individual 55
Bundle the cables and the thread the accompanying 3 Velcro cable
ties (B) through the holders and pull them tight.
Then fit the cover for the connections (see page 13).
A
B B B
- 15 -

Preparing the remote control unit

Inserting or replacing batteries
Press on the embossed arrow whilst pushing the battery cover down.
Only use leak-proof micro-cells of the LR 03 (AAA) Alkali-Manganese
type. Do not use different types of batteries and old and new batter-
ies together.
The batteries used must not be exposed to excessive heat such as
sunlight, fire or similar!
Pay attention to the correct polarity of + and – when inserting the
batteries.
If the batteries are too weak after longer use, the TV set prompts you
to change the batteries.
Dispose of used batteries in an environmentally friendly way (see
page 148).
Push the cover back on from below after having inserted the batteries.
Adjusting the remote control for operating the TV set
Press the TV key.
See page 133 for how to operate other Loewe appli-
ances and how to re-programme the remote control
keys.