Remote Display Requirements
New Features and Commands
Known Problems/Limitations
If you use Annex Manager on an X Windows terminal, we recommend
that you have more than 2MB of RAM to avoid problems when you have
multiple windows open simultaneously.
Annex Manager Release 3.0 now supports the newly released 5399. For
more information on the new 5399 product features and commands,
please see the Remote Annex Release 5.0.12 Release Notes and updated
Annex Manager User's Guide included with your documentation.
•
The following erroneous error condition and message should be
ignored:
If a PRI device (6300, 5393, 5399) is selected and the switch
type is changed the following message is displayed:
<annex_name (node port 0)> anxt1CasDnisDigits :
Parameter cannot be set: it does not exist or is
read-only.
There was an error setting one or more parameters.
This may be due to a timeout.
Annex Manager R3.0 Release Notes
166-025-511
Rev. C
5