Table of Contents
Advertisement
Safety Instructions
EN
Important Safety Instructions
Read all of these instructions before setting up your printer. Also be sure to follow all warnings and
instructions marked on the printer.
Notes on Installing
Do not obstruct the vents on the product.
If the vents are obstructed, the internal temperature could rise and cause a fire.
Do not cover the printer with a cloth or install it in a location with poor ventilation.
Make sure you secure sufficient space for the installation as described in the manual.
U Page 11 in this manual "Installation location"
Do not install or store the printer or the Production Stacker in an unstable location or a location
subject to vibrations from other equipment.
The printer or the Production Stacker could fall or tip over and cause an injury.
Do not install the printer or the Production Stacker in locations subject to oily smoke and dust,
or in locations subject to humidity or where it could easily get wet.
An electric shock or fire could occur.
Do not tilt the printer or the Production Stacker more than 10 degrees forward, back, left, or
right while moving it.
Failure to observe this precaution could result in the printer or the Production Stacker falling over,
causing accidents.
Because the printer or the Production Stacker is heavy, it should not be carried by one person.
At least four people are needed to unpack or carry the printer. At least tow people are needed to
unpack or carry the Production Stacker. See the following for details on the product's weight.
Printer U Page 11 in this manual
Production Stacker U "Setup Guide" for the Production Stacker
Before assembling the printer or the Production Stacker, make sure you clear away the
packaging sheets, packing materials, and supplied items from the installation area.
If you slip or trip on these items, it could cause an injury.
Make sure you use the correct posture when lifting the printer or the Production Stacker.
Lifting using the wrong posture could cause an injury.
When lifting the printer or the Production Stacker, make sure you lift at the locations indicated in the manual.
If you lift holding other parts, the printer or the Production Stacker may fall, catching your fingers
and causing an injury. See the following for details on lifting the product.
Printer U "User's Guide" (online manual)
Production Stacker U "Setup Guide" for the Production Stacker
When placing the printer or the Production Stacker on a stand with casters (wheels), make sure
you secure the casters before you perform the work so that they do not move.
If the Product moves while you are performing the work, it could cause an injury.
!
Warning
!
Caution
Do not try to move the product while the casters (wheels) and stoppers (printer only) are secured.
Failure to observe this precaution could result in the printer or the Production Stacker falling over,
causing accidents.
When moving the printer or the Production Stacker, avoid locations with steps or uneven flooring.
Failure to observe this precaution could result in the printer or the Production Stacker falling over,
causing accidents.
Notes on Handling
Do not use the printer in locations with volatile substances such as alcohol or thinner, or near
naked flames.
An electric shock or fire could occur.
Do not use the printer if it is giving off smoke or if you notice any abnormal odors or noises.
An electric shock or fire could occur.
If any abnormalities occur, turn off the power and unplug the power cable immediately, and then
contact your dealer or Epson Support.
Never try to repair the printer yourself as this is extremely dangerous.
Do not use the printer in an environment where flammable gas or explosive gas may exist. Do
not use sprays that contain flammable gas inside or near the product.
A fire could occur.
Only route the cables as indicated in the manual.
A fire could occur. This could also cause damage to connected devices.
Do not insert or drop any metallic or flammable items into the openings on the printer.
An electric shock or fire could occur.
Do not touch any areas inside the printer except for those indicated in the manual.
An electric shock or burn could occur.
Do not disassemble anything except when indicated to do so in the manual.
If the LCD for the control panel is damaged, be careful of any leaking liquid crystal.
Provide first aid under any of the following conditions.
❏ If liquid adheres to your skin, immediately wipe it off and then wash the area using large
volumes of soapy water.
❏ If any liquid gets in your eyes, flush them with clean water for at least 15 minutes, and consult
a physician immediately.
❏ If ink enters your mouth, consult a physician immediately.
If any foreign objects or liquid such as water enters the printer, stop using it immediately.
An electric shock or fire could occur.
Turn off the power and unplug the power cable immediately, and then contact your dealer or
Epson Support.
5
!
Caution
!
Warning
Advertisement
Table of Contents
