Table of Contents
Advertisement
Agent Greeting Card Test and Debug Capabilities
Page 27 of 66
The NVRAM stores up to six fatal errors, starting with the most recent. The
command printAllErrors is used to show the errors, and appears as follows:
-> printAllErrors
Error (1): Error Code 0x3001, logged at 23:35:11 05/02/1998
Error (2): Error Code 0x4004, logged at 23:33:13 05/02/1998
Error (3): Error Code 0x5003, logged at 23:31:02 05/02/1998
Error (4): Empty
Error (5): Empty
Error (6): Empty
value = 30 = 0x1e
Each error consists of a four—digit hex identifier and a timestamp. The first
digit of the identifier corresponds to the task which logged the error, the other
three making up a unique error number. The actual fatal error codes and brief
descriptions are shown in the Appendix "Fatal Error codes" on page 59.
Event logging is done on an on-going basis to a set of files on the "/A:" drive.
These files can be displayed using the mcShellPrintLastLog and
mcShellPrintCurrentLog functions as described above. See ": Multi-card
specific debug commands" on page 25.
Agent Greeting Card Maintenance and Troubleshooting Guide
Advertisement
Table of Contents
