About.placement.and.installation.work; About Placement And Installation Work; Deciding.on.an.installation.site; Deciding On An Installation Site - Roland TrueVIS VG2-640 Setup Manual

About Placement and Installation Work

The placement and installation of this machine must be performed by suitably qualified workers.
WARNING

Deciding On an Installation Site

Install the machine in a quiet, stable location offering good operating conditions. An unsuitable loca-
tion can cause accidents, fire, faulty operation, or breakdown.
WARNING
WARNING
WARNING
WARNING
WARNING
CAUTION
Unsuitable installation sites
• Locations subject to large fluctuations in temperature or humidity
• Locations subject to shaking or vibration
• Locations where the floor is tilted, not level, or unstable
• Dusty locations
• Locations exposed to direct sunlight
• Locations near air-conditioning or heating equipment
• Locations exposed to water or moving air
• Locations exposed to considerable electrical or magnetic noise or other forms of electromagnetic
energy
Entrust operations such as transportation, unloading, and placement to
suitably qualified workers.
Suitable equipment and technical skills are required in handling the machine.
Tasks that require undue effort may result in a major accident.
Install the machine in a location that is level, stable, and able to bear the
weight of the machine.
The total weight of the machine may reach 290 kg (639 lb.) or more (260
kg [573 lb.] or more for the 54-inch model). Installation in an unsuitable loca-
tion may cause a major accident, including tip over, fall, or collapse.
Never install the machine outside or in any location where exposure to
water or high humidity may occur.
Current leakage may cause electrical shock or fire.
Never install the machine close to any flammable object or in a gas-filled
location.
Combustion or explosion may occur.
Install the machine in a clean, brightly lit location.
Working in a location that is dark or cluttered may lead to an accident, such
as becoming caught in the machine as the result of an inadvertent stumble.
Position the machine so that the power plug is within immediate reach at
all times.
This is to enable quick disconnection of the power plug in the event of an
emergency. Install the machine next to an electrical outlet. Also, provide
enough empty space to allow immediate access to the electrical outlet.
Ensure adequate ventilation for the work area.
Failing to perform ventilation may result in a health hazard or danger of com-
bustion due to ink fumes.
1. Checks before Installation
1.Introduction
21