While On An Active Call; Place A Call On Hold; Transfer A Call - Nortel 2210 User Manual

While on an active call

This section describes features available during an active call.

Place a call on hold

Use the Hold feature when talking on one line and another call arrives on a second
line. Retain the original call by placing it on hold and then answer the second call.
To place a call on hold:
+
To retrieve a call on hold:

Transfer a call

Use the Transfer feature to redirect a call to the appropriate person.
To use the Transfer feature to direct a
call to a third party:
Trns
Press the Function
2 key to activate the Hold function. The
number corresponding to the line on
hold flashes in the upper display area.
Note: If Automatic Hold
active call is automatically placed on
hold when you answer the second call.
1. Press the Line
Keys menu in the active (off-hook)
state.
2. Press the number key corresponding to
the flashing line number in the upper
display area.
1. Press the Transfer
party is on hold and a dial tone sounds.
The line number corresponding to the
line on hold flashes steadily in the upper
display area.
2. Dial the DN to which the call is being
transferred.
While on an active call
key and the number
is enabled, the
key to access the Feature
soft key. The other
65