Dashboard; Osd Menu Mode; Lcd Functionality In Ready Mode; Local Keypad - Barco F70 Series User Manual

2.5.4 Dashboard page symbols
General.
The symbols in the dashboard page gives an overview of which of the projectors features that are enabled.
The symbols will mainly occur in the lower row in the dashboard page, but some of them will occur in another
position in the same page.
When grey, the function is not enabled.
When blue, the function is enabled. See the figure in chapter
dashboard page shows the highlighted Brilliant Color mode, Digital shift and Digital zoom.
Symbol explanations are showed in the figure below.
3D
4K
Black Level
Black Level les
Blend
Image 2–6 Dashboard Symbols explained

2.5.5 OSD Menu mode

About.
This is the projector setup menus, explained in detail in their own chapters in this manual. (Source menu,
Image menu, Installation menu, System Settings menu, Status menu).

2.5.6 LCD functionality in Ready Mode

About
When the projector is in Ready mode, it is possible to activate and navigate in the projectors menu on the LCD
display, in order to set or check values and settings before the lamp is switched on.
Ready mode is enabled either when the power cable is connected (after the startup sequence), or when
pressing the Power Off for 4 seconds when the projector is in On mode. See chapter 5.4 Power Mode
Transitions for a graphic presentation of the ready mode.
Procedure
When in ready mode, press the Menu button either on the remote control, or the keypad to enter the menus.
Navigate by using the arrow and OK keys, either on the remote control or the keypad.

2.6 Local keypad

About
The Keypad gives direct access to several functions, in addition to access to the menu system. The keypad
and remote control functions are equal.
The keypad has a back light that can be switched on and off manually. The light turns off automatically after a
preset time.
Digital Shift
Blend Black level
Digital Zoom
Blend Files
Brilliant Color HDR
Feature 16:9 Laser
Smear Reduction
Crop
Getting to know the projector.
"LCD Status screens", page 26
Test Patterns
Warp
Warp Bow
Warp Files
Warp Four Corners
601–426 /15
where the
F70 Series 29