Nortel Passport 1100 Release Note page 13

or
config ipx sap update-delay <ipx-network-number>
<delay-timer>
where:
ipx-network-number
delay-timer
Access policy support
You can enable or disable access-policies for TFTP service. To enable TFTP
service for a specified access-policy, enter the following command:
config sys access-policy policy <pid> service
tftp<enable|disable>
This command configures specific policy IDs, where
<pid>
enable|disable
service.
In addition, the CLI command
access-policy information for TFTP service.
is a value in milliseconds (1...1000).
is the policy ID. Enter a value from 1 to 65535
enables or disables the specified access policy for TFTP
Note: This feature is not supported in Device Manager.
Release Notes for the Passport 1000 Series Software Release 2.0.7.8
is the network number in hexadecimal format.
sh config verbose
Access policy support
now shows the
13