12
Recommendations and feature-specific information about release 2.0.7.8
Do you wish to continue (y/n) ? y
formatting ... operation pushed to background
Passport 1000 Series switch-1200#
IPX RIP and IPX SAP pacing (frame rate)
This frame rate is used to control the number of frames per second for IPX RIP
and IPX SAP. The default is 20 frames per second. In Device Manager, the frame
rate is controlled by the pace parameter; and in the CLI, it is controlled by the
update-delay parameter. (118350-1)
The "pace" is the number of packets per second. The "update-delay" is expressed
in milliseconds.
For example:
pace = 50 (packets per second)
update-delay = 20 milliseconds (1000/pace)
To make changes to the pace parameter:
To make changes to the update-delay parameter:
config ipx rip update-delay <ipx-network-number>
<delay-timer>
212629-A
From the Device Manager menu bar, choose Routing > IPX > RIP or
Routing > IPX > SAP.
In the command line interface (CLI), use the following commands: