Installation - Toshiba MMD-UP0071SPH-UL Installation Manual

4

Installation

CAUTION CAUTION
Strictly comply with the following rules to prevent damage of the indoor units and human injury.
• Do not put any heavy article on the indoor unit or let a person get on it. (Even units are packaged)
• Carry in the indoor unit as it is packaged if possible. If carrying in the indoor unit unpacked by necessity, use buffering cloth or other material not to damage the unit.
• To move the indoor unit, hold the hooking brackets (4 positions) only.
Do not apply force to the other parts (refrigerant pipe, drain pan, foamed parts, resin parts or other parts).
• Hanging bolt pitch of air intake chamber side is different (center position), make sure not to make mistake to install the setting direction.
• Carry the package by two or more persons, and do not bundle it with plastic band at positions other than specified.
• To install vibration isolation material to hanging bolts, confirm that it does not increase the unit vibration.
 External dimensions
ø3.5" (90) knockout hole
(For fresh air intake)
9-EN
Hanging bolt pitch
Unit extremal dimension
C (Outside)
3.9 " (100)
– 5 –
1" (25) or less
(Only the position of a check cover.)
A
B
Wires
drawing-out port
Electrical control box
Hanging bolt
Check cover
6.1" (155)
3.3" (85)
Refrigerant pipe
1.4" (35) connecting port
D
(Liquid side )
Drain pipe connecting port (VP25)
(Be sure to connect the flexible hose
(Accessory) into the port.)
Refrigerant pipe connecting
port
( Gas side E )
2" (51)
4.7" (120)
Model type
6.8" (172)
UP007 - UP012
UP015 - UP018
Unit: in (mm)
A B C D E
30.3" 27.6" 25.6" 1/4" 3/8"
(770) (700) (650) (6.4) (9.5)
38.2" 35.4" 33.5" 1/4" 1/2"
(970) (900) (850) (6.4) (12.7)
10-EN