The Security Window - Bay Networks 5399 Manual

Chapter 4 Setting Up RACs
Managing Remote Access Concentrators Using Annex Manager
4-46
3. Set up security for the selected RACs as desired.
4. Optionally click
(If you have already clicked
.
5. Click
Apply
Annex Manager sets security for the selected RACs.
6. Click to close the window.
Close

The Security Window

If the RACs you selected in the
system, the button for Modem Ports, Non-modem Ports, WAN Calls,
On
Restrict, and Security is selected when this window first appears. In this
case the
enable_security
settings to Annex Manager deactivates security but does not change
Off,
the parameter setting.
enable_security
Incoming Box
The box controls security for incoming modem ports, non-
Incoming
modem ports, and WAN Calls.
The and buttons control security for the RACs you selected in the
On Off
window. If you choose
Main
security server, including security for AppleTalk, CLI, IPX, and SLIP/
PPP connections.
Modem Ports and Non-modem Ports do not apply for ISDN Primary Rate
RACs. WAN Calls does not apply for RACs with asynchronous ports.
to reset all fields to the previous values.
Restore
you cannot do this.)
Apply
window currently use this security
Main
parameter is set to
enabled
, Annex Manager activates the ACP
On
. If you change these